|
Selected Publications
The carbide M7C3 in low-temperature-carburized austenitic stainless steel, Frank Ernst, Dingqiang Li, Harold Kahn, Gary M. Michal, Arthur H. Heuer, Acta Materialia, 59( 2011) 6: 2268-2276.
Microstructural effects on tension behavior of Cu-15Ni-8Sn Sheet, Joshua Caris, DingQiang Li, John J. Stephens Jr., John J. Lewandowski, Materials Science and Engineering A, 527(2010)769-781.
High cycle fatigue behavior of a nanostructured composite produced via extrusion of amorphous Al89Gd7Ni3Fe1 alloy powders, Adel B. El-Shabasy, Dingqiang Li, and John J. Lewandowski, Materials Science and Engineering A, 513-514 (2009)202-207.
Tensile properties and cold rolling of binary Ni–Al g/g’ two-phase single crystals, Dingqiang Li, Kyosuke Kishida, Masahiko Demura, and Toshiyuki Hirano, Intermetallics, 16(2008)1317-1324.
The grain boundary character distribution of O and O+BCC Ti-Al-Nb alloys, Dingqiang Li and C.J. Boehlert, Metall Mater Trans A, 36A (2005) 2569-2584.
The grain boundary character distribution of a fully-orthorhombic Ti-25Al-24Nb(at.%) alloy, Dingqiang Li, S.I. Wright and C.J. Boehlert, Scripta Materialia, 51(2004), No.6: 545-550.
Microstructure and mechanical properties of cold-rolled thin foils of binary Ni-Al g/g' two-phase alloys, Dingqiang Li, Masahiko Demura, Kyosuke Kishida, Yozo Suga, and Toshiyuki Hirano, Defect Properties and Related Phenomena in Intermetallic Alloys, Mat. Res. Soc. Symp. Proc. vol.753 (2003) BB5.23.
The application of computer simulation in the heat-treatment process of a large-scale bearing roller, Jiansheng Pan, Yongjun and Dingqiang Li, Journal of Material Processing Technology, 122 (2002), No2-3, 241-248.
Oxidation behavior of FeAl alloys with and without titanium, Dingqiang Li, Yun Xu and Dongliang Lin, Journal of Materials Science, 36(2001)6: 979-983.
Tensile behavior of SiCp/2124Al composites with various SiC particle sizes at room temperature, Dingqiang Li, Hojin Ryu and Soon Hyung Hong, Transactions of Nonferrous Metals Society of China, 10 (2000)6: 732-736.
The mechanical properties and dislocation structures of FeAl alloy at elevated temperature, Dingqiang Li, Yi Liu and Dongliang Lin, Materials Science and Engineering A, 249(1998)1-2: 206-216.
Microstructural evolution and activation energy during superplastic deformation of FeAl based intermetallic alloys, Dingqiang Li and Dongliang Lin, Scripta Materialia., 36(1997) 1289-1294.
The microstructure evolution in FeAl alloy during superplastic deformation, Yi Liu, Dingqiang Li, Dongliang Lin and Shipu Chen, Scripta Materialia, 34(1996) 7:1095-1100.
Study of superplastic deformation in an FeAl based alloy, Dingqiang Li, Dongliang Lin, Aidang Shan and Yi Liu, Scripta Metallurgica et Materialia, 33(1995)681-685.
Superplasticity in Fe3Al-Ti alloy with large grains, Dongliang Lin, Aidang Shan, and Dingqiang Li, Scripta Metallurgica et Materialia, 31(1994)1455-1460.
Effect of strain rate and manganese addition on the ductility of FeAl alloy, Dingqiang Li, Dongliang Lin, Aidang Shan and Yi Liu, Scripta Metallurgica et Materialia, 30(1994)655-659.
|
